Product Categories

Contact Us

Tel:+86-755-29059861

Fax:+86-755-85279220

Mob:+86-13714200873

E-mail:
info@superbheater.com

Add: No8, Third Industrial Zone, Baoshi South Road, Shiyan Town, Baoan District, Shenzhen, Guangdong, China

2 Inch Electric Immersion Heater For Water Tank

2 Inch Electric Immersion Heater For Water Tank

2 Inch Incoloy Screw Plug Electric Immersion Heater For Water Tank Industrial immersion heaters are medium capacity heating units designed to heat liquids, viscous fluids, forced air and gases inside tanks, vessels and pipes. screw plug electrical immersion heaters are designed to be immersed directly into The gas or liquid being heated; since these heaters come into direct contact with the gas or liquid, heat-up times are very fast.

InquiryChat Now

  • Product Details

2 Inch Incoloy Screw Plug Electric Immersion Heater For Water Tank

  • Product Details

2 inch incoloy screw plug electric immersion heater for water tank

Industrial immersion heaters are medium capacity heating units designed to heat liquids, viscous fluids, forced air and gases inside tanks, vessels and pipes. screw plug electrical immersion heaters are designed to be immersed directly into the gas or liquid being heated; since these heaters come into direct contact with the gas or liquid, heat-up times are very fast.

Immersion heaters manufactured at Hongtai consist of a single or a set of tubular elements that are formed into hairpins and welded or brazed to a screw plug. The sheath material of the heating elements could be steel, copper, stainless steel or Incoloy.

The standard screw plug sizes utilized are 1”, 1 1/4, 2” and 2 1/2” and are made of steel, brass or stainless steel, depending on the application. Various types of electrical protective enclosures, built-in thermostats, thermocouples and high-limit switches can be incorporated into screw plug immersion heaters.


Screw Plug NPT size

Plug material

Standard element diameters

Maximum voltage

Phase

Heating elements material

Maximum number of elements

1"

BRASS
     STEEL
     SS 304
     SS 316

8MM

380V

1

COPPER STEEL
     INCOLOY 800
     SS 304
     SS316

1

1 1/4"

8MM

380 V

1

2

1 1/2”

8MM,10MM

440V

1 or 3

3

2"

10MM 12MM

600 V

1 or 3

3

2 1/2"

12MM

600 V

1 or 3

3


INDUSTRIAL APPLICATIONS:

Process Air & Gas Heating
Process Chemical Reactors
Boilers and Water Heating
Rinse Tank Heating
Parts Cleaning Solutions
Lube Oil & Fuel Oil Heating
Hydraulic and Heat Transfer Oils
Caustic Solution Heating
Plating & Finishing Chemicals

 

MAXIMUM TEMPERATURE AND SHEATH MATERIAL SELECTION TABLE


Heater sheath

Maximum sheath temperature

Used to heat

Steel

7500F (4000C)

oil, hydraulic oil

Copper

3600F (1800C)

water, tap/municipal only

Incoloy 800

15000F (8150C)

water, alkaline solutions, air, gases, radiant

Incoloy 840

14000F (7600C)

air, radiant

Inconel 600

16000F (8700C)

strong alkaline solutions, high temperature gases

Stainless steel

12000F (6500C)

de-ionized, de-mineralized, process water, some mild acids



How to Order:

To place an order, or get a quotation, please provide the information itemized below. Contact Superb Heater for further assistance.

· Electrical Rating...................................Voltage, phase, Wattage

· Screw Plug Size and Material...........1”, 1 ¼”, 1 ½”, 2”, 2 ½” NPT or other size and standard; brass, steel, 304SS or 316SS

· Element Sheath Material....................Copper, Steel, 304SS, 316SS, Incoloy® or other

· Element Diameter and Quantity.......Provide element diameter and quantity (one, two or three).

· Element Watt Density..........................8, 16, 23, 48 or 60 W/in2, or other watt density value

· Immersion Length............................... Provide desired immersion length or maximum length allowable.


Also our engineer can help you to design the heaters, contact Superb Heater for details.


Main technical parameters of immersed electric heating resistance

1. Pipe material: iron, stainless steel 304, stainless steel 304+ greaseproof coating, stainless steel 316L, stainless steel 316L+ greaseproof coating, stainless steel 321, stainless steel 310S, Ingle

2. Flange material: stainless steel 201, stainless steel 304, stainless steel 316


3. Heating wire material: 0Cr25Al5, 0Cr21Al6Nb, 0Cr27Al7Mo2, Cr20Ni80, etc.


4. Insulation filler: medium temperature insulating magnesium oxide powder, high temperature insulating magnesium oxide powder, etc.


5. Rated voltage: 110V, 220V, 380V, etc.


6. Power: According to the total length of the heating zone of the flow or circulating oil wire heating tube, the power is 1-2KW per meter and the maximum is 2KW.


7. Pipe diameter: 8mm-12mm


8.U-shaped tube number: G1.5: φ10*3U φ10*2U φ10*1U G2.0: φ12*3U φ12*2U φ12*1U


9. One-sided length: according to customer requirements


10. Thread thread: 1 inch 1.25 (11⁄4) inch 1.5 (11⁄2) inch, 2.0 inch, 2.5inch (21⁄2)


11. Thread thread material: stainless steel 201, stainless steel 304, stainless steel 316


12. Anti-fouling coating: liquid coating, powder coating


13. Cold insulation resistance: The cold insulation resistance should be less less than 50MΩ at the factory inspection; after the seal test, the insulation resistance after long-term storage or use should be no less than 1MΩ.


14. Cold leakage current: ≤ 0.5 mA


15. Cold insulation: 1600v. 1/seg


Immersion electric heating tube product advantage


1. Non-standard custom, flexible production, to meet the heating requirements of various equipment.



2. Corrosive liquid heating immersion electric heating tube can automatically fall off the scale accumulated on the surface of the electric heating tube when heating weak acid, weakly alkaline, or hard water.


3. Flexible threaded thread can be added.


4. Our products have obtained CE certification from the German authoritative certification body - Rheinland Institute and are exported to various countries. [1. Understand the German Rhine Institute 2. View the CE certificate and report].


5. Flow or circulating oil immersed electric heating tube closed oil tank heating flange electric heating tube can be directly fixed on the female ring gear, which is easier to install than the plane flange.


6. Under the same power and length, the flow or circulating oil immersed electric heating tube is lower than the flow or circulating oil flange electric heating tube.


We should pay attention to the following points during the use of immersed electric heating resistance tubular heater element:


1. Its heating zone must be completely immersed in the liquid, and the dry burning phenomenon will burn the immersed electric heating element;


2. The scale of the surface of the immersed electric heating tubular heater should be cleaned regularly to ensure its good service life;


3. The terminal is effectively waterproofed to avoid leakage;


4. The power design of the heating resistance tubular heater per metre of the immersed electric heating pipe shall not exceed 2KW;


Before installing the immersed electric heating resistance tubular heater, make sure that the container is placed in a stable condition before installing and fixing it. Because the container that is not placed smoothly is easy to overturn, dumping the Liquid, causing the immersed electric heating resistance tubular heater to dry, due to fire, electric shock and the like;


6. Do not install the immersed electric heating tubular heater at the air inlet with high humidity. This will easily cause the electric heating tube to be damp and the insulation will drop, which may cause dangers such as electric leakage and electric shock.


Immersion electric heating tubular heater ordering instructions


To order an immersed electric heating resistance tubular heater, please provide the following parameters:


Voltage


2. Power


Pipe diameter


4. Several U-tubes are composed


5. Unilateral length


6. Threaded flange size


7. Material (tube material, thread material)


8. Installation method


9. Liquid level situation




Hot Tags: 2 Inch Electric Immersion Heater For Water Tank manufacturers, suppliers, factory
  • Feedback